Programming A Memory Channel - Icom IC-A14IC-A14S Instruction Manual

4
MEMORY OPERATION
n Programming a memory channel
Program often-used frequencies with the following instruc-
tions.
D For IC-A14
q Push [CLR] to select the frequency mode, if necessary.
w Set the desired frequency. (p. 8)
• Push [FUNC] , then push [WX](7) to select a weather chan-
nel mode, and then select the desired weather channel using
[Y]/[Z] or keypad if desired. (p. 23)
e Push [FUNC] then push [MW](MR) to enter the select
memory write mode.
• Memory mode indicator blinks.
No frequency is displayed when a blank channel is No frequency is displayed when a blank channel is No frequency is displayed when a blank channel is
selected.
r Push [Y]/[Z] to select the desired memory channel num-
to select the desired memory channel num- to select the desired memory channel num-
ber.
• Push [FUNC], then push [BANK](3) to enter bank selection , then push , then push
mode, and push mode, and push mode, and push [
push [ENT] to select the BANK number if desired. [ENT] [ENT] to select the BANK number if desired. to select the BANK number if desired.
t Push [ENT] to program the set condition into the memory
Push Push [ENT] [ENT] to program the set condition into the memory to program the set condition into the memory
channel and return to the frequency mode. channel and return to the frequency mode. channel and return to the frequency mode.
13
Blinks when select memory Blinks when select memory Blinks when select memory
write mode is selected. write mode is selected. write mode is selected.
[BANK](3) [BANK](3)
Y Y Z Z
[ [ ] ] / / [ [ ] ] or appropriate digit key ( or appropriate digit key ( or appropriate digit key ([0]–[9]), then
• EXAMPLE: Programming WX-05 into memory channel 9 Programming WX-05 into memory channel 9 Programming WX-05 into memory channel 9
in memory BANK 3.
Push
Push then
Push Push Push Push Push Push Push Push Push or or or or or or or or or , , , , , , , , ,
or, push or, push or, push
Push Push Push Push Push Push Push then then then then then then then
Push then
Push then
*Shows briefly.
Push or ,
or, push
*Shows briefly.
Push to complete the programmig.