Pocket Beep And Tone Squelch; I Pocket Beep Operation - Icom IC-2200H Instruction Manual

I Pocket beep operation

This function uses subaudible tones for calling and can be
used as a "common pager" to inform you that someone has
called while you were away from the transceiver.
D Waiting for a call from a specific station
q Set the operating frequency.
w Push [SET
] to enter set mode.
LOCK
e Push [SET] or [MONI] several times until "Ct" for tone
squelch or "dt" for DTCS squelch appears.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
Tone squelch frequency setting
r Rotate [DIAL] to select the desired tone squelch frequency
or DTCS code.
t When operating the pocket beep function with DTCS
squelch, push [SET] once then rotate [DIAL] to select the
DTCS polarity.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN
S ET MONI LOW
DTCS polarity setting
y Push any key other than [SET] or [MONI] to exit set mode.

POCKET BEEP AND TONE SQUELCH

DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
DTCS code setting
PRIO SCAN
TONE M/CALL V/ MHz
u Push [TONE
T-SCAN ] several times until "
are displayed to turn ON the pocket beep with tone
squelch or DTCS squelch, respectively.
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
Appears when the pocket beep
with tone squelch is activated.
i When a signal with the matched tone is received, the
transceiver emits beep tones and blinks " ".
• Beep tones sound for 30 sec. and " " blinks. To stop the beeps
and blinking manually, push any key. When the beep tones are
not stopped manually, " " continues flashing until step
operated.
o Push [PTT] to answer.
• " " disappears and cancels the pocket beep function automati-
cally.
!0 Push [TONE
T-SCAN ] several times until " " or "
appears to cancel the tone squelch or DTCS squelch func-
tion.
10
" or "
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
DIGITAL PRIO AO BUSY
MUTE
NAR
MID
LOW
LOCK ANM DUP T-SCAN PRIO SCAN
S ET MONI LOW TONE M/CALL V/ MHz
Appears when the pocket beep
with DTCS squelch is activated.
o is
" dis-
"
9
10
48