Ce Marking; Emc Compliance Declaration; Emc Regulations; Vfd Category Of C2 - INVT Goodrive880 Series Hardware Manual

Goodrive880 Series Inverter Unit Hardware Manual
A.3.1 CE marking
The CE marking on the product nameplate indicates that the inverter is CE-compliant, meeting the
regulations of the European low-voltage directive (2014/35/EU) and EMC directive (2014/30/EU).
A.3.2 EMC compliance declaration
European union (EU) stipulates that the electric and electrical devices sold in Europe cannot generate
electromagnetic disturbance that exceeds the limits stipulated in related standards, and can work properly
in environments with certain electromagnetic interference. The EMC product standard (EN 61800-3)
describes the EMC standards and specific test methods for adjustable speed electrical power drive systems.
Our products have been compliant with these regulations.
A.4 EMC regulations
The EMC product standard (EN 61800-3) describes the EMC requirements on inverter products.
Application environment categories:
First environment: Civilian environment, including application scenarios where VFDs are directly connected
to the civil power supply low-voltage grids without intermediate transformers.
Second environment: All locations outside a residential area.
Inverter unit categories:
Category C1: Inverter of rated voltage lower than 1000V, applied to the first environment.
Category C2: Rated voltage lower than 1000V, non-plug, socket, or mobile devices; power drive systems that
must be installed and operated by specialized personnel when applied to the first environment.
Note: The EMC standard IEC/EN 61800-3 no longer restricts the power distribution of inverter units, but it
specifies their use, installation, and commissioning. Specialized personnel or organizations must have the
necessary skills (including the EMC-related knowledge) for installing and/or performing commissioning on
the electrical drive systems.
Category C3: Inverter of rated voltage lower than 1000 V, applied to the second environment. They cannot
be applied to the first environment.
Category C4: Inverter of rated voltage higher than 1000V, or rated current higher or equal to 400A, applied to
complex systems in the second environment.
A.4.1 VFD category of C2
The induction disturbance limit meets the following stipulations:
1. Select the motor and control cables according to the description in the manual.
2. Install the inverter unit according to the description in the manual.
The product may generate radio interference, you need to take measures to reduce the
interference.
A.4.2 VFD category of C3
The anti-interference performance of the inverter unit meets the requirements of the second environment in
the IEC/EN 61800-3 standard.
The induction disturbance limit meets the following stipulations:
1. Select the motor and control cables according to the description in the manual.
2. Install the inverter unit according to the description in the manual.
Inverters of category C3 cannot be applied to civilian low-voltage common grids. When
applied to such grids, the inverter may generate radio frequency electromagnetic
interference.
202311 (V1.0)
Technical data
103