Application Standards; Ce Marking; Emc Compliance Declaration - INVT Goodrive880 Series Hardware Manual

Goodrive880 Series Regenerative Rectifier Unit Hardware Manual
Item
substances
Organic/Biological
effects
Pollution degree
Installation altitude 0–2000M. Derating is required when the altitude exceeds 1000m.
Mechanical stability
Vibration stress
-Displacement
-Acceleration
-Complaint with
Impact stress
-Acceleration
-Complaint with
A.4 Application standards
The following table describes the standards that our regenerative rectifier products comply with.
EN/ISO 13849-1
IEC/EN 60204-1
IEC/EN 62061
IEC/EN 61800-3
IEC/EN 61800-5-1
IEC/EN 61800-5-2
GB/T 30844.1-2014
GB/T 30844.2-2014
GB/T 30844.3-2017
A.4.1 CE marking
The CE marking on the product nameplate indicates that the product is CE-compliant, meeting the
regulations of the European low-voltage directive (2014/35/EU) and EMC directive (2014/30/EU).
A.4.2 EMC compliance declaration
European union (EU) stipulates that the electric and electrical devices sold in Europe cannot generate
electromagnetic disturbance that exceeds the limits stipulated in related standards, and can work properly
in environments with certain electromagnetic interference. The EMC product standard (EN 61800-3)
describes the EMC standards and specific test methods for adjustable speed electrical power drive systems.
202401 (V1.0)
Run
Class 3B1 EN 60721-3-3
Class 2 EN 61800-5-1
10...57 Hz, 0.075 mm
58...200 Hz, 9.8m/s2mm
2M2
Cabinet:
5–13.2 Hz, 1 mm
13.2–100 Hz, 0.7g
20 ms, 98 m/s
2
3M4
Safety of machinery—Safety-related parts of control systems—Part 1: General
principles for design
Safety of machinery. Electrical equipment of machines. Part 1: General
requirements
Safety of machinery—Safety-related functional safety of electrical, electronic,
and programmable electronic control systems
Adjustable speed electrical power drive systems. Part 3: EMC requirements and
specific test methods
Adjustable speed electrical
requirements—Electrical, thermal and energy
Adjustable speed electrical
requirements—Function
General-purpose variable-frequency adjustable-speed equipment of 1 kV and
lower—Part 1: Technical conditions
General-purpose variable-frequency adjustable-speed equipment of 1 kV and
lower—Part 2: Test methods
General-purpose variable-frequency adjustable-speed equipment of 1 kV and
lower—Part 3: Safety requirements
Storage
Class 1B1 EN 60721-3-1
5...9 Hz, 1.5mm
9...200 Hz, 4.9m/s
2
1M2
11 ms, 100 m/s
2
1M2
power drive
power drive
Technical data
Transportation
Class 2B1 EN 60721-3-2
5...9 Hz, 3.1mm
9...200 Hz, 9.8m/s
2
2M2
11 ms, 100 m/s
2
2M2
systems—Part 5-1: Safety
systems—Part 5-2: Safety
70