Icu Function Application; Function Module - INVT Goodrive880 Series Hardware Manual

Goodrive880 Series Inverter Unit Hardware Manual

5.5 ICU function application

5.5.1 Function module

ICU can be used with other function modules to achieve corresponding functions, as shown in the following
table.
No. Name
Encoder
1 detection
module
Input/output
2
module
PROFINET IO
3
module
PROFIBUSDP
4
module
5 CAN bus module EC-TX805
Optical fiber
6 expansion
module
SLOT expansion
7
module
Voltage
8 detection
module
Intelligent
9 operation
keypad
Note:
EC-TX823 and EC-TX821 can only be inserted in SLOT2 or SLOT3.

It is recommended to install the EC-PG805 card in SLOT1.

It is recommended to install the EC-TX803 card in SLOT3.

202311 (V1.0)
Model Function
TTL incremental encoder
EC-PG805-05
signal detection
HTL incremental encoder
EC-PG805-24
signal detection
Resolver encoders signal
EC-PG804
detection
Two AIs
Two AOs
EC-IO801
Three DIs
1 relay outputs
PROFINET
EC-TX809
Ethernet
EC-TX803 PROFIBUS-DP bus adapter
CANopen bus adapter
One 50M
EC-TX821
optical fiber
Three
EC-TX823
optical fibers
I-ESM-30 SLOT expansion module
AC voltage
I-VDM-10
module
DC voltage
I-VDM-20
module
Human-machine interface
SOP-880-01
keypad
Connect
with ICU
through
IO industrial
expansion
50M expansion
Fiber optic
detection
Fiber optic
detection
Fiber optic
RS422
Inverter Control Unit (ICU)
Dimensions
(W×H×D)
(unit: mm)
SLOT 73.5×103×23.5
SLOT 73.5×103×23.5
SLOT 73.5×103×23.5
SLOT 73.5×103×23.5
SLOT 73.5×74×23.5
SLOT 73.5×74×23.5
SLOT 73.5×74×23.5
SLOT 73.5×74×23.5
SLOT 73.5×74×23.5
99.5×303×65
37.4×180×113
37.4×180×113
74×121.5×26
82