Tag Memory Check - Omron V680-CA5D01-V2 User Manual

Tag Memory Check

The DATA CHECK command (MD C/K) performs a memory check. A CRC (Cyclic Redundancy Check) code
calculation, write, and comparison are made using the check block unit specified by the user.
The CRC code is calculated from the generated polynomial expression x
The calculation area is the portion of the check block
specified by the start address and the number of bytes
excluding the last two bytes. The last two bytes are the
check code area.
When check code write is specified (process designation:
K), the CRC of the calculation area data is calculated and
written to the check code area. When data comparison is
specified (process designation: C), the CRC of the calcu-
lation area data is calculated and a comparison made
with the check code area data. If they coincide, an end
code of 00 will be returned for the V680 command (75
will be returned for the V600 command), and if they do
not coincide, an end code of 76 will be returned as a
warning.
For details on the command format, refer to DATA CHECK (MD
C/K).
p. 125
Example of Tag Memory Check
In the following example, the data in address 0010
1) In this example, the following data already exists in
the memory.
0010
0011
0012
0013
0014
3)Execute MDSTC1001005 (code verification).
The normal response MD0010 will be returned if the
data coincides.
0010
0011
0012
0013
0014
12
H
34
H
56
H
12
H
34
H
56
H
5C
H
D6
H
16 + x 12 + x
Address
0000
0001
Area start
address
Number of check
block bytes
CRC (leftmost)
CRC (rightmost)
to 0012 is checked.
H H
2) Execute MDSTK1001005 (code calculation).
The CRC code 5CD6 calculated from the data
123456 is written to addresses 0013
12
0010
H
34
0011
H
56
0012
H
0013 5C
H
0014 D6
H
If a data error occurs, MD7610 (a data error warning)
will be returned.
00
0010
H
0011 34
H
0012 56
H
0013 5C
H
0014 D6
H
SECTION 4
Functions
5 + 1.
Check code
calculation area
(Number of check
block bytes −2)
Check code area
(2 bytes)
and 0014 .
H H
Data error
RFID System
User's Manual
93