Omron V680-CA5D01-V2 User Manual page 47

SECTION 2
Installation, Connections, and Wiring
Installing the USB Driver
When connecting the ID Controller to the host device for the first time, the USB driver must be installed
on the computer.
Downloading the USB Driver
Download the USB driver for the V680-CA5D01-V2 or V680-CA5D02-V2.
For details, ask your OMRON representative for information on the USB driver.
Installing the USB Driver on the Computers
The USB Driver can be used on Windows 2000 or XP. Install the driver on the host device following the
procedure corresponding to the operating system being used.
Operation may not be possible on other operating systems.
Windows 2000
1.
Turn ON the power to the computer and start Windows 2000.
2.
Connect the ID Controller to the computer via USB.
Refer to USB Port for information on the connection method.
The following dialog box will be displayed when the ID Controller is connected via USB.
3.
Once the following dialog box has been displayed, click the Next Button.
RFID System
44
User's Manual
p. 42