Omron V680-CA5D01-V2 User Manual page 53

SECTION 2
Installation, Connections, and Wiring
Checking Installation
Use the following procedure to confirm that the driver has been correctly installed.
1.
Connect the ID Controller to the computer via USB.
2.
Select Control Panel - Performance and Maintenance from the Windows Start Menu.
3.
Click the System Icon.
4.
Click the Device Manager Button on the Hardware Tab Page.
5.
Select Ports (COM & LPT) and check that OMRON RFID USB COM is displayed.
If the driver is correctly installed the property window for the V680-CA5D@@-V2 will be as follows:
Communications with the ID Controller can be performed with the COM number displayed in parentheses after OMRON RFID
USB COM.
RFID System
50
User's Manual