SECTION 3
Preparations for Communications
Switch Settings
Opening the Cover
Open the cover by inserting a small screwdriver into the groove on the cover.
Setting Methods
Use the provided screwdriver to make switch settings as shown in the following diagram.
• Rotary Switch Settings (SW1, SW2)
• Toggle Switch Settings (SW5, SW6)
RFID System
58
User's Manual
Controller Number Switches (SW1, SW2)
Terminating
Resistance
Switch (SW6)
• DIP Switch Settings (SW3, SW4)
DIP Switch (SW3)
DIP Switch (SW4)
Mode Switch (SW5)