Omron V680-CA5D01-V2 User Manual page 238

List of End Codes
End codes are expressed in 2-digit hexadecimal.
Classification End code
Normal end
Host communications
error
Tag communications error
Tag memory warning
System error
Refer to Error Lists for details on error codes
p. 240
00 Normal end
74 Polling command received or polling command query (no results information).
75 Auto command cancelled. (Processing cancelled before a Tag was detected.)
Polling command cancelled. (Processing cancelled before a Tag was detected.)
Normal end for DATA CHECK command or OVERWRITE COUNT CONTROL command
(no error)
76 Auto command cancelled. (Processing cancelled after a Tag was detected.)
Polling command cancelled. (Processing cancelled after a Tag was detected.)
10 Parity error
11 Framing error
12 Overrun error
13 FCS error
14 Format error
Execution condition error
18 Frame length error
70 Tag communications error
71 Mismatch error
72 Tag missing error
76 Copy error
7A Address error
7C Antenna not connected error
7D Write protected error
Error end (verification error or overwrite count exceeded) for DATA CHECK
76
command or OVERWRITE COUNT CONTROL command
92 Antenna internal power supply voltage error
93 Internal memory error
SECTION 5
Communications
Name
RFID System
235
User's Manual