Omron V680-CA5D01-V2 User Manual page 272

Degree
3 Protection against sprin-
kled water
4 Protection against water
spray
5 Protection against water jet
spray
6 Protection against high
pressure water jet spray
7 Protection underwater
8 Protection underwater
Oil resistance (OMRON in-house standard)
Oil-resistant No adverse affect from oil drops or oil spray approaching from any direction.
Oil-proof Protects against penetration of oil drops or oil spray approaching from any direction.
Note: This OMRON in-house standard confirms resistance to cutting and other oils. It is equivalent to the
former JEM standard.
Protection
Protects against sprinkled
water approaching at a maxi-
mum angle of 60 ° from verti-
cal towards the product.
Protects against water spray
approaching at any angle
towards the product.
Protects against water jet
spray approaching at any
angle towards the product.
Protects against high-pres-
sure water jet spray approach-
ing at any angle towards the
product.
Resists the penetration of
water when the product is
placed underwater at speci-
fied pressure for a specified
time.
Can be used continuously
underwater.
Protection
Test method (with pure water)
Water is sprinkled for 10 min at a maximum angle of
60 ° to the left and right from vertical from the test
machine.
Water is sprayed at any angle towards the product for
10 min from the test machine.
Water rate is 0.07
liter/min per hole.
Water is jet sprayed at any angle towards the product
for 1 min per square meter for at least 3 min in total
from the test machine.
2.5 to 3 m
Water is jet sprayed at any angle towards the product
for 1 min per square meter for at least 3 min in total
from the test machine.
The product is placed 1 m deep in water (if the product
is 850 mm max. in height) for 30 min.
The test method is determined by the manufacturer and
user.
SECTION 7
Appendices
Water rate is 0.07
liter/min per hole.
12.5 liter/min
Discharging nozzle: 6.3 dia.
100 liter/min
2.5 to 3 m
Discharging nozzle: 6.3 dia.
1 m
RFID System
269
User's Manual