Omron V680-CA5D01-V2 User Manual page 174

List of End Codes
End codes are expressed in 2-digit hexadecimal.
Classification End code
Normal end
Host communications
error
Tag communications error
System error
Refer to Error Lists for details on error checks.
p. 240
00 Normal end
Command processing terminated.
Polling command query (after communications with Tag were completed normally)
Polling command cancelled.
Normal end (no error) for DATA CHECK command or OVERWRITE COUNT
CONTROL command
01 Polling command received.
02 Polling command query (no results information)
03 Multi-access communications ended
10 Parity error
11 Framing error
12 Overrun error
13 FCS error
14 Format error
15 Execution condition error
18 Frame length error
70 Tag communications error
71 Mismatch error
72 Tag missing error
76 Error end (verification error or overwrite count exceeded) for DATA CHECK
command, OVERWRITE COUNT CONTROL command or Data check error in
READ TAG MEMORY ERROR CORRECTION command
77 Data check warning in READ TAG MEMORY ERROR CORRECTION command
79 Tag error
7A Address error
7C Antenna not connected error
7D Write protected error
92 Antenna internal power supply voltage error
93 Internal memory error
Number of Antennas error
9C
Former Antenna setting error
SECTION 5
Communications
Name
RFID System
171
User's Manual