Table of Contents
Advertisement
8/31/22, 1:52 PM
LC-3DPrint
Box
Third-Party Supplies and Equipment
3D Systems™ provides this partial list of equipment and supplies/accessories that are useful for handling,
processing or nishing FabPro parts. You should keep a list of preferred vendors for any 3D-print-related products
you may order. Equipment and supplies are not limited to this list, as you may nd other products and methods that
more suit your needs.
NOTE: Customers are responsible for consulting local health, safety, and environmental regulations to
determine additional site requirements. No information that is contained in this document constitutes legal
advice regarding such requirements. 3D Systems™ has no responsibility to determine whether or not the
customer is in compliance with applicable laws, nor do we guarantee the accuracy or quality of the supplier
product.
Uninterruptible Power Supply (UPS) - While a UPS is not required for use with the printer, you may wish to use one
for battery backup of your printer in the case of a power surge or outage.
UV Filter Screens - While these are not required, you may need to install lters over windows and lights so as not to
cure any exposed print material before printing.
Disposable Lint-Free Paper Towels - You will use lint-free paper towels for assisting in cleaning printed parts,
printer components, and material spills.
CAUTION: It is necessary to use lint-free paper towels, as lint from other types of paper towels can stick
on the printed part or printer component. Lint on the printed part can cause improper nal part curing in
the UV oven. Lint on printer components can contaminate the material on the print platform and in the
print tray, causing the printed part to lose accuracy or causing a build to crash.
Cellulose Wadding - This absorbent material is useful for covering your FabPro workbench, as well as for absorbing
solvents during air drying of printed parts.
Chemically Resistant Gloves - 3D Systems recommends the use of 100% nitrile gloves whenever handling uncured
material, partially cured printed parts, and solvents.
Eye-Wash Station - This may be designed speci cally for eye-washing or may be an adapter that ts onto an
existing faucet.
Fire Extinguisher - NFPA Class B such as CO , dry-chemical, or foam
Hazardous-Materials Waste Can - While it is optional to get a re-proof waste can, you must have a waste can
approved to contain FabPro/NextDent materials, according to all local, state, and federal regulations.
Storage Cabinet - This is for storing material bottles and other FabPro-related equipment. You may choose to get a
re-proof cabinet; but it is not required to be re-proof.
Lab Coats - Optional measure to protect your clothes/skin from uncured print material and solvents.
Neoprene-Coated Gloves - If you choose to use TPM as your cleaning solvent, these gloves are recommended for
handling the chemical.
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
41cm (16.1
44cm (17.3
in)
in)
2
User Guide
Unboxed Speci cations
38cm (15 in)
22
kg (48.5 lbs)
35/111
Advertisement
Table of Contents
