Table of Contents
Advertisement
8/31/22, 1:52 PM
Flush Cutters
- Used to cut supports off the printed part
Rinse Bottle - 500mL
part cleaning. Also used to squirt solvent onto a printed part or printer
component.
Nitrile Gloves - Large
material and cleaning solvents.
Paper Towels
- used to help clean printed parts and printer components.
Also used to prevent and clean material spills.
Resin Mixer
- used to mix the liquid print material while in the print tray
Part-Cleaning Brush
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
- used to store the recommended solvents used in
- used to protect hands from uncured liquid print
- to brush dust-like debris off the printed part
User Guide
1
1
30
pairs
100
1
1
42/111
Advertisement
Table of Contents
