3D Systems FabPro 1000 User Manual page 107

8/31/22, 1:52 PM
Print-Process Messages
These are messages you may see after sending a print job to the printer via 3D Sprint or USB. For more information,
please see the section
Printer Message
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
Warning material
expired
Hold button to
continue
Incompatible
material
Verify material type
Cartridge empty
Please scan another
Begin Your Print Job.
Translation
Print job
Hold btn to continue
MyPrintJob.pxl
Hold button to
continue
Verifying build
Please scan
material cartridge
Abort job?
Hold button to abort
User Guide
This message means that the scanned material is past
the manufacturer's expiration date. In this case, it is
recommended to discard the material bottle, and the
remaining expired print material in the print
tray, according to all local, state, and federal
regulations. However, you may choose to continue
printing with the expired material at your own risk.
CAUTION: 3D Systems is not responsible for
poor print quality or for failed builds when
expired print material of any kind is used.
This error will occur when the scanned print-material type
does not match the material sent to the printer in the build
le.
This error will occur when the system detects that you have
exceeded the number of pours contained in a material
bottle. Please scan a new material bottle.
This message occurs after you
once while in idle mode.
This message occurs when you hold down the power
button on the screen described above. For seeing this
screen during USB le submit, please see the section
USB File Submit Messages.
This message occurs after you
on the previous screen.
This message occurs after con rming the "my-print-job.pxl"
message above. Scan the barcode on the material bottle
you are using for the print job.
This message occurs if you
time during the print process.
to con rm cancelation of print job.
press the power button
hold down the power button
press the power button at any
Hold down the power button
107/111