Table of Contents
Advertisement
8/31/22, 1:52 PM
2. Remove and clean the print tray, as seen in the section
a. If you received and advanced-exchange printer, install the tray inside it, as per the section
b. If you are moving your working printer to another facility, do not reinstall the print tray yet. You will need to remove
and clean some other components rst. Skip to Step 4.
3. Remove and clean the glass print base and catch tray, as in the sections
Catch
Tray, respectively.
a. If you received an advanced exchange printer, install the glass print base and catch tray in that printer. Skip to Step 5.
b. If you are moving your working printer to another facility, reinstall the glass print base and catch tray.
4. If you are moving your working printer to another facility, reinstall the print tray at this time.
NOTE: Ensure all components are dry after cleaning, before reinserting them into your new or
existing printer.
NOTE: Clear material and trace amounts of other materials may not be visible upon inspection. It is best to
simply wipe everything down that could have material on it.
NOTE: Please use the pictures below for comparison with your equipment to judge if it is clean.
Clean glass print base
Clean Print Platform
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
User Guide
Remove and Clean Print
Clean catch tray
Clean Print Tray
Tray.
Install Print
Clean Glass Print
Base and
Tray.
Remove/Replace
99/111
Advertisement
Table of Contents
