Build Chamber - 3D Systems FabPro 1000 User Manual

8/31/22, 1:52 PM
Overview
Printer Door
A
radiation emitted by the projector. It also prevents outside light from getting in the build chamber during printing.
Power/Navigation Button
B
printer-functions, please see the section
indicate the printer's status.
Front Display
C
USB Port - this allows the user to send build les via a USB drive
D
Network Port
E
Power Jack
F

Build Chamber

G
Front Leveling Feet
H
The printer is only one component of the complete system. Many accessories and other components make up a
printer facility. This section describes these accessories and components.
Build Chamber
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
- This door must be closed during printing. It has UV-resistant glass to protect the observer from the UV
- Turns machine on/off and serves as the control for printer functions. For its use in
- A dot-matrix display that serves as the UI on the printer
- connects the printer to internet or LAN
- plug the AC adapter into this inlet
- Compartment where 3D part is printed
- Can be used in leveling the printer
User Guide
Power Button. The power button also displays different colored lights to
14/111