3D Systems FabPro 1000 User Manual page 70

8/31/22, 1:52 PM
Material Type
NextDent Model
®
NextDent Surgical
®
Guide
NextDent Model ®
2.0
NextDent Ortho ®
Rigid
FabPro™ Proto
GRY
FabPro™
JewelCast GRN
FabPro™ Tough
BLK
FabPro™ Elastic
BLK
FabPro™ Flexible
BLK
NOTE: The recommendation for max number of builds in the chart above is assuming builds of a medium
width and height volume. If you have very dense builds with tall parts, the solvent baths may become
saturated with a fewer number of builds. Always pay attention to build-surface tackiness and shininess, as
this is an indication that uncured liquid material is still on the build.
NOTE: For the rst bath, it is okay to use solvent that has already been used to clean other parts. You may
do this until the solvent becomes saturated. Then you must discard the dirty solvent according to all local,
state, and federal regulations.
NOTE: For FabPro branded materials: for the rst bath, 3D Systems' EZ Rinse C solvent is also suitably
effective.
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
Ultrasonic Cleaning
1st bath - 3 min dirty
Isopropyl Alcohol (IPA)
or Ethanol
2nd bath - 2 min in clean
IPA or Ethanol
1st bath - 2 min dirty IPA
2nd bath - 2 min in clean
IPA
Fresh IPA rinse
1st bath - 1 min dirty in
IPA
2nd bath - clean IPA dip
30 seconds
Fresh IPA dip 30
seconds
1st bath - 4 min dirty IPA
2nd bath - 3 min in clean
IPA
Fresh IPA rinse
1st bath - 4 min dirty IPA
2nd bath - 4 min in clean
IPA
Fresh IPA rinse
1st bath - 2.5 min dirty
IPA
2nd bath - 2.5 min in
clean IPA
Fresh IPA rinse
User Guide
Max Number of Builds That Can
Be Cleaned Before Solvent is
Manual Cleaning Saturated
manual cleaning 10-12
not recommended
1st bath - 2 min 10-12
dirty Isopropyl
Alcohol (IPA)
2nd bath - 1 min in
clean IPA
1st bath - 2 min 5
dirty Isopropyl
Alcohol (IPA)
2nd bath - 1 min in
clean IPA
1st bath - 3 min 6-8
dirty Isopropyl
Alcohol (IPA)
2nd bath - 2 min in
clean IPA
1st bath - 4 6-8
min dirty IPA
2nd bath - 4 min in
clean IPA
Fresh IPA rinse
1st bath - <2.5 5
min dirty IPA
2nd bath - <2.5 min
in clean IPA
Fresh IPA rinse
70/111