Table of Contents
Advertisement
8/31/22, 1:52 PM
a. If you see the "Scan Test Failed" message, press the
power button to exit the diagnostic. This message could
mean one of three things:
i. The barcode you printed out from this page is
corrupted. Please print the page out again and run
the scan diagnostic once more.
ii. The scanner has some sort of interference. Please
check the clear scanner cover to ensure it is clean of
debris and ngerprints, and run the scan again.
iii. If you performed steps
does not complete, the scanner is damaged in some
way. Call your authorized print-material provider.
b. If you see the "Scan Test Complete" message, the
barcode scan was successful.
power button to exit the diagnostic.
Exit Test Scanner Diagnostic
You may exit Test Scanner diagnostics by:
1.
Pressing
the power button any time before the diagnostic begins.
a.
Hold down
the power button to exit.
2. Aborting the diagnostic that is currently running by
power button. You will see the screen at the right.
a.
Press
b.
Hold down
Test Projector
This diagnostic exists to test the functionality the printer's projector. You will need to test the projector if, for
example, printed parts have inconsistent curing on their surfaces.
WARNING: THE PRINTER WILL PROMPT YOU TO KEEP THE PRINTER DOOR CLOSED DURING THIS
DIAGNOSTIC. TO PREVENT YOURSELF FROM LOOKING AT THE LIGHT EMITTING FROM THE PRINTER,
KEEPING THE PRINTER DOOR SHUT IS NECESSARY WHENEVER THE PROJECTOR IS ACTIVE.
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
i
and ii, and the test scan still
Press or hold down
the power button to see the the screen at the right.
the power button to exit.
User Guide
the
Printer Message
pressing
the
Printer Message
Scan test
failed
Scan test
complete
Translation
Exit menu?
Hold
button to
exit
Scan test
failed
Exit menu?
Hold
button to
exit
Translation
96/111
Advertisement
Table of Contents
