3D Systems FabPro 1000 User Manual page 105

8/31/22, 1:52 PM
Printer Message Glossary
This glossary summarizes all the messages you may see on the display of the printer, during the print process and
printer diagnostics.
Printer-Activation Messages
These are messages related to activating your printer with 3D Sprint. For more information, please see the section
Print via 3D Sprint.
Printer Message
USB File-Submit Messages
These are messages you may get related to the USB le-submit process. For more information, please see the
section Print via USB
Printer Message
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
Translation
Please activate
[IP address]
Activating printer
Activation required
to start build
Drive.
Translation
Submit job via USB?
Hold button to
continue
MyPrintJob.pxl
Hold button to
continue
Job ready
Hold button to start
Cancel USB submit?
Hold button to exit
No jobs detected
Hold button to exit
User Guide
This message means that the printer is not connected to
3D Sprint. Clear this message by activating 3D Sprint.
This message appears when you activate your printer
through 3D Sprint. The message will disappear when
activation is complete.
This message occurs when you attempt to send a build le
to the printer before activating the printer.
This message occurs after you insert a USB device into the
USB drive on the printer. Hold down
detect print jobs. Press the power button to cancel.
This message occurs when the printer detects one or more
print jobs on the USB device.
to submit a job to the printer.
skip over a print job on the USB device's list of print-job
les. You may only submit one print job to the printer at a
time.
This message occurs after you have con rmed your build
le in the previous step.
This message occurs when you
before print job detection. Hold down
con rm cancelation.
This message occurs when the printer does not detect any
build les on the USB device.
to exit the USB- le-submit process.
the power button to
Hold down the power button
Press the power button to
press the power button
the power button to
Hold down the power button
105/111