Table of Contents
Advertisement
8/31/22, 1:52 PM
Power the Printer On/Off
Power the Printer On
Be sure the printer is plugged in and press the power button once.
Power the Printer Off
Printer Message
Idle Mode
Printer Message
© 2022 3D Systems, Inc. All rights reserved.
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
User Guide
Translation
Power down printer?
When the printer is idle, you may power it off by
Hold button to continue
pressing the power button once. You will see the
message at the right on the printer screen. Hold
down the power button to con rm power off. When
you wish to turn the printer on again, press the
power button.
Shutting down
You will see this message when the printer is shutting
down.
Translation
3dsystems
You will see this screen when you rst power the printer on.
Initializing
Printer ready
When the printer is in Idle Mode, you will see this message
on the printer screen.
[IP Address]
3D Systems, Inc.
333 Three D Systems Circle | Rock Hill, SC |
29730
www.3dsystems.com
Rev. D, P/N 45-D32
111/111
Advertisement
Table of Contents
