Table of Contents
Advertisement
8/31/22, 1:52 PM
1. The further the distance the build part is being moved from the printer to the post-processing area, the longer the
opportunity for the build part to get damaged by dropping, bumping into objects, and other environmental factors.
2. The further the distance the build part is being moved, also longer is the opportunity for uncured material to drip onto
the oor. If oors are porous, such as carpeting or some tiles, they can absorb the spilled material and would need to
be professionally cleaned or replaced.
Refer to the section
and
Measures for weights and measurements of the LC-3DPrint Box. Consider the following additional
speci cations when selecting the location for your post-processing equipment.
Dimensions for the LC-3DPrint Box, the recommended UV oven for post-curing parts for the printer.
Staging-Area Surfaces
Flooring, tabletops, or desktops under the post-processing equipment should be non-porous and suitable for
cleaning with solvents. Carpeted oors are not recommended, as any spilled material can soak in and is di cult to
completely clean up.
Electrical Requirements
LC-3DPrint Box
Power con guration: 110V/230V – 50/60Hz – 2.6A/1.3A
Electrical power for the LC 3D-Print Box must be on a surge-protected circuit. A UPS, while not required, is
recommended in areas with frequent power uctuations, as surges and spikes can damage electronic components
and power loss can damage the unit.
Ultrasonic Cleaner (Optional)
Power con guration: An example of the power con guration for a consumer-grade ultrasonic cleaner is 120W at
40Hz. There are ultrasonic cleaners of many sizes, from around 2.5L (0.66 gal.) to upwards of 757L (200 gal.)
Determine which size ultrasonic cleaner is best for your needs.
You must also get an ultrasonic cleaner that is rated to use ammable solvents like IPA or Ethanol. Failure to do so
could present a re hazard.
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
Space
Requirements for a suggested post-processing area layout. Refer to the
User Guide
section Weights
32/111
Advertisement
Table of Contents
