3D Systems FabPro 1000 User Manual page 23

8/31/22, 1:52 PM
NOTE: The printed-part mechanical properties will return to standard when parts dry completely (back into
the 10-65% RH range) and are at standard room temperature. In the case of the effects of exposure to high
humidity, return to standard properties could take a day or two.
Temperature - °C, Humidity - %RH
Temperature - °C, Humidity - %RH
NextDent Print Materials
FabPro Print-Material Bottles
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
User Guide
NextDent Print Material Bottles
23/111