Print Tray - 3D Systems FabPro 1000 User Manual

8/31/22, 1:52 PM
Elevator Arm
A
Print Platform
B
Elevator Lead Screw
C
Elevator Rails
D

Print Tray

- Holds the material during the print process
E
Tilt Tray - After a layer has printed, this tilts the print tray down to peel the bottom layer of the printed part off the
F
print-tray lm.
Catch Tray - Protects the bottom of the print engine from material spills
G
Chassis - Platform on which the build chamber sits
H
QR-Code Scanner
I
Magnetic Door Catch
J
Print Tray
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
- Moves the print platform up and down the elevator during printing
- The platform on which the printed part attaches during printing
- Moves the elevator arm up and down when it turns
- Guide the elevator arm on a straight path
- Scans QR codes on print-material bottles
- Spring-loaded magnet that keeps the printer door closed during printing.
User Guide
15/111