3D Systems FabPro 1000 User Manual page 89

8/31/22, 1:52 PM
# Issue Description
3 Shifting - layers on the printed
part have shifted in the X or Y
direction
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
User Guide
Customer Troubleshooting Steps
This can be caused by:
Hardware
Run elevator diagnostics. Observe the elevator motion throughout the
whole process. If it moves in an irregular motion, contact your authorized
print-material provider. The printer will need to be sent in for repairs.
Part Orientation
Large, at parts can cause a shift when built parallel to the print
platform. Orienting the parts at a 5° or 10° angle will typically be enough
to eliminate the shift. Thicker parts may need a larger angle.
89/111