3D Systems FabPro 1000 User Manual page 19

8/31/22, 1:52 PM
LC-3DMixer front
Mixing Timer
A
Time Increase
B
Time Decrease
C
Start/Stop Button
D
Bottle Rollers
E
Power Button
F
Power Inlet - Plug the female end of the power cord into this inlet
G
Device Label
H
LC-3DMixer bottle placement
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
- Shows the duration of material mixing
- Increases the duration of mixing
- Decreases the duration of mixing
- Starts and stops bottle mixing
- Rest the material bottles in between each of the pairs of rollers (please see the image below)
- Turns the mixer on and off
- Provides important information about the LC-3DMixer
User Guide
LC-3DMixer back
19/111