3D Systems FabPro 1000 User Manual page 21

8/31/22, 1:52 PM
The table below lists the FabPro print materials that are currently supported on the FabPro 1000 printer, as well as
the properties of cured parts printed with these materials. Please note that not all properties in the table below
apply to every material. As such, different materials will have blank spaces for some of the property elds below.
NOTE: All materials come in 1kg bottles.
Material Property
Description
Color
Layer Thickness
Vertical Build
Speed
Flexural Strength
Flexural Modulus
Tensile Modulus
Tensile Strength
Shore Hardness
Elongation at
Break
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
FabPro™ FabPro™
Proto JewelCast GRN
GRY
Fast, Master patterns
general for gypsum
purpose investment
casting
Gray Green
50 30 microns
microns
21 mm/hr 5.3 mm/hr
100 MPa 14 MPa (2030
(14,500 psi)
psi)
2,840 577 MPa (84 ksi)
MPa (410
ksi)
2,800 355 MPa (51.5
MPa (410 ksi)
ksi)
67 MPa 14 MPa (2,000
(9,700 psi)
psi)
83 D 68 D
7% 10%
User Guide
FabPro™ FabPro™
Tough Elastic
BLK BLK
Tough Design
production elastomer
plastic
Black Black
50 100
microns microns
14 mm/hr 14 mm/hr
64 MPa
(9,700 psi)
2,020 MPa
(290 ksi)
1,860 MPa 3.7 MPa
(270 ksi) (540 psi)
44 MPa 3.9 MPa
(6382 psi) (570 psi)
79 D 65 A
44% 81%
FabPro™
Flexible BLK
Please
see Special
Considerations
for Flexible
BLK
Polypropylene-
like,
exible
Black
125 microns
10 mm/hr
41 MPa (5950
psi)
1120 MPa (162
ksi)
1330 MPa (193
ksi)
41 MPa (5950
psi)
76 D
93%
21/111