Hardware Issues; Network Issues - 3D Systems FabPro 1000 User Manual

8/31/22, 1:52 PM
# Issue Description
5
Poor surface quality on side
walls - specs dotting part
surface
6 Part not accurate in the X/Y
direction
7 Part not accurate in the Z
direction

Hardware Issues

Issue
Description
#
1 Glass print base
broken
2 Print Tray
Damaged on
Single Spot Over
Time

Network Issues

infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
Customer Troubleshooting Steps
This is a sign of debris in the print tray. Ensure that the print tray is clean
of debris in between builds. The side walls should look like the image
below:
Run the Accuracy Wizard in 3D Sprint, as seen in the section
Wizard.
In 3D Sprint, change the Scaling Factor Z eld under Build Styles. For
assistance in testing the Z scale of your parts, contact 3D Systems
Customer Service.
Customer Troubleshooting Steps
The plate will need to be replaced. Call your authorized print-material
provider for replacement information. Please see the section
Print Base for instructions on preventing this from happening.
Print tray will need to be replaced if damaged. To avoid this damage in the future, do
not print the same object on the same location of the build platform repeatedly. If you
must build the same object repeatedly, move the object to a different area of the print
platform in 3DSprint each time.
User Guide
Clean Glass
Accuracy
91/111