8/31/22, 1:52 PM
Necessary Accessories
LC-3D-Print
Box, or other UV-curing oven. If you are using
NextDent material, you must use this speci c oven to achieve
®
medial certi cation for your printed parts.
NOTE: The LC-3DPrint Box is also the recommended
UV-Curing oven for all FabPro™ print materials. All
materials have been tested to work best with
this oven.
Material Bottles
- The printer uses various general purpose and
dental materials, which come in 1kg bottles. Please see the
sections
FabPro Print Material
a complete list of currently supported print materials.
Optional Accessories
LC-3DMixer
- If your material requires machine mixing, this is the
recommended bottle mixer and is supplied by 3D Systems. Please
see the section
Stir the
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
and
NextDent Print
Materials for
Material for more information.
User Guide
43/111