3D Systems FabPro 1000 User Manual page 46

8/31/22, 1:52 PM
4. Remove the nishing kit and open it up. Inspect the contents against
the items listed below. Ensure that all items are accounted for in their
expected quantities.
a. Rinse Tank 1 - contains diagonal cutting pliers, nitrile gloves, and
resin mixer
b. Rinse Tank 2 - contains power brick and rinse bottle
c. Bottle of FabPro™ Proto GRY material with Safety Data Sheet (SDS)
d. Print Platforms (x2)
e. Platform Scraper
f. Glass Print Base
g. Print Tray Storage - contains Print Tray
h. Paper Towels
5. Open four box clips along bottom of box. You do not have to remove
them.
. Remove box from around printer, leaving just the base cardboard and
foam packaging.
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
User Guide
46/111