Table of Contents
Advertisement
8/31/22, 1:52 PM
Ultrasonic Cleaner
parts, as well as print trays and print platforms, with an ultrasonic
cleaner. 3D Systems does not supply ultrasonic cleaners. Please
purchase this from your local supplier
Low Workbench
- To sit your printer on top of and store frequently
used tools. Work benches are not supplied by 3D Systems. Please
purchase this from your local supplier.
Unpacking the Printer
NOTE: These instructions are only for unpacking the printer you are obtaining for the rst time. For
instructions on unpacking a printer obtained via advanced exchange, please see the section
Exchanged
Your printer will ship in a cardboard box with foam packaging, atop a wooden pallet.
CAUTION: Ensure that you SAVE the pallet, all cardboard, all foam and all other packing material in case
you need to repack your printer. Shipping the printer without original packing materials may cause
damage to the printer.
NOTE: Please see the section
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
- You may choose to clean partially cured printed
Printer.
Repackaging the
User Guide
This image is for example purposes only and is not
a recommendation or endorsement of any brand of
ultrasonic cleaner.
This image is for example purposes only and is not
a recommendation or endorsement of any brand of
workbench.
printer for repacking instructions.
Unpacking
44/111
Advertisement
Table of Contents
