Table of Contents
Advertisement
8/31/22, 1:52 PM
2. Lift the print tray up and out of the printer, careful not to
spill any material that is inside.
Clean Print Tray
If you are not building again for a long period of time, it is best to empty the print tray and clean it to prolong the life
of the tray.
1. Pour material out of print tray and into storage bottle via a funnel. Seal the bottle and store it in a cool, dark place.
Clean the funnel with the
CAUTION: Be sure that you are pouring the material back into a bottle of the same material. Mixing
materials causes both materials to become ineffective.
2. Pour recommended solvent into the print tray and let it soak for a while.
3. Discard solvent/material mix according to local, state, and federal regulations.
4. Use a micro ber cloth or lint-free paper towel to softly wipe the bottom of the print tray.
CAUTION: Do not put pressure on the print-tray lm when cleaning. Doing so could damage the lm and
render it unusable.
infocenter.3dsystems.com/fabpro1000/print/book/export/html/526
recommended solvent
for your material.
User Guide
77/111
Advertisement
Table of Contents
