Zero Key - Ametek 3050-AMS User Manual

Zero Key

Use the Zero key to define on-demand Zero settings.
Figure 3-3.
Main Menu, Zero key.
Hold Outputs
Adjust Offset
Zero
Abort
PN 305804902, Rev A
ZERO
Enable
Select this function to hold the output at the last valid reading during
a Zero.
Disable
Select this function to allow the output to change during a Zero.
Enable
Select this function to adjust the offset at the end of a Zero cycle.
Disable
Select this function if you do not want to adjust the offset.
This function initiates a Zero cycle.
This function aborts a Zero/Verification cycle and returns the analyzer to
normal operation.
Hold Outputs
Enable
Disable
Adjust Offset
Enable
Disable
Zero
Abort
Controller/Interface
|
3-3