Zero Key; Hold Outputs; Adjust Offset; Zero - Ametek 3050-AMS User Manual

Zero Key

Figure 4-3.
Main menu for the Zero
key.
Use the Zero Key to define on-demand zero settings.

Hold Outputs

Enable
Select this function to hold the output at the last valid reading during a

zero.

Disable
Select this function to allow the output to change during a zero.

Adjust Offset

Enable
Select this function to adjust the offset at the end of a zero cycle.
Disable
Select this function if you do not want to adjust the offset.
Zero
This function initiates a zero cycle.

Abort

This function aborts a zero/verify cycle and returns the analyzer to normal
operation.
ZERO
Hold Outputs
Enable
Disable
Adjust Offset
Enable
Disable
Zero
Abort
|
User Interface 4-3