Zero Key - Ametek 5830 User Manual

Zero Key

Use the Zero key to define on-demand Zero settings.
Figure 3-3.
Main Menu, Zero key.
Hold Outputs
Adjust Offset
Zero
PN 583054901, Rev YA
Enable
Select this function to hold the output at the last valid reading during
a Zero.
Disable
Select this function to allow the output to change during a Zero.
Enable
Select this function to adjust the span after a verify.
Disable
Select this function to verify without adjusting the span.
The 5830 will always adjust the offset after a zero.
This function initiates a zero cycle.
|
Controller/Interface 3-3