Table of Contents
Advertisement
Maintenance work
20.1.3 Cleaning the filter element
Figure 70: Cleaning the filter element
(1) - Filter element
(2) - Water separator
Cleaning steps
1. Drain the water condensation (see section 20.1.2).
2. Unscrew the water separator (2).
3. Unscrew the filter element (1).
4. Blow out the filter element (1) using a compressed-air pistol.
5. Wash out the filter tray using benzine.
6. Tighten the filter element (1).
7. Tighten the water separator (2).
8. Tighten the drain screw (3).
Service manual H867 Version 00.0 - 08/2013
WARNING
Risk of injury
Switch off the machine at the main power switch and discon-
nect it from the pneumatic network before you clean the filter
element.
6
4
8
2
10
0
1
2
3
Attention
Damage to the filter due to solvent-based cleaners
Solvent-based cleaners damage the filter.
Use only solvent-free substances for washing out the filter tray.
(3) - Drain screw
85
Advertisement
Table of Contents
