Table of Contents
Advertisement
POLLING MEMORY TRANSMISSION USING
F-CODES
When your machine receives a transmission request from another machine, this function sends a fax stored in a F-code
memory box (polling memory) in your machine to that machine. The other machine must correctly specify the F-code
configured in your machine or transmission will not take place.
The document to be transmitted must be scanned into a F-code polling memory box.
Transmission request (polling)
using an F-code
Sub-address:
The other
Passcode:
machine
System Settings:
F-Code Memory Box
This is used to create memory boxes (polling memory) for F-code polling memory transmission.
A memory box name, sub-address, and passcode are programmed in each box.
SCANNING A DOCUMENT INTO A MEMORY BOX FOR
F-CODE POLLING TRANSMISSION
Follow these steps to scan a document into a memory box (polling memory) for F-code polling transmission.
Keys in the display can be selected with the arrow keys and the [OK] key.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1
When the original is a different size than the size setting, set the original size.
☞
SPECIFYING THE SCAN SIZE AND SEND SIZE
Select the special modes.
(1) Select the [Special Modes] key.
2
(2) Select the [Memory Box] key.
☞
SPECIAL MODES
AAAAAAAA
XXXXXXXX
Transmission
(page 6-107) (Web page only)
(page 4-69)
The machine
F-code polling memory box
(page
)
4-50
4-108
FACSIMILE
Box name:
BBBB
Sub-address:
AAAAAAAA
Passcode:
XXXXXXXX
Contents
Advertisement
Chapters
Table of Contents
