Forwarding Received Faxes; Forward) - Sharp DX-C310 Operation Manual

FORWARDING RECEIVED FAXES

(Fax Data Forward)
When the machine cannot print because it is out of paper or out of toner, received faxes can be forwarded to another
previously programmed fax machine.
This function is convenient in an office or work area that has two or more telephone lines and another fax machine is
connected to a different line than the machine.
The machine
Forwarding of received faxes is executed in the system settings of the machine. Press the [SYSTEM SETTINGS] key on
the operation panel to display the system setting menu screen in the display. Select [Fax Data Receive/Forward] - [Fax
Settings], and then select the key that executes received fax forwarding.
• If some pages of a fax that is being forwarded were successfully printed, only those pages that were not printed will be
forwarded.
• A forwarded fax becomes a fax transmission job. If transmission does not take place because the transmission was
canceled or an error occurred, the fax will be held in memory until it can be printed.
• Faxes received to an F-code confidential memory box cannot be forwarded.
• If a password entry screen appears after selecting the [OK] key, "Hold Setting for Received Data Print" has been enabled.
Enter the password with the numeric keys to begin forwarding.
☞
PRINTING A PASSWORD-PROTECTED FAX (Hold Setting For Received Data Print)
• System Settings:
Use this to forward received faxes when the machine is unable to print.
• System Settings (Administrator): Set the Telephone Number for Data Forwarding
This is used to store the forwarding fax number.
The machine cannot print
Received fax
Fax Data Receive/Forward
Forwarding
destination
Forwarding
(page 6-16)
4-65
FACSIMILE
Printing
(page 4-61)
Contents