Operation Settings; Disabling Of Job Priority Operation; Disabling Of Bypass Printing; Key Operation Setting - Sharp DX-C310 Operation Manual

Operation Settings

Settings related to machine operation can be configured. Select [System Settings] - [Operation Settings] from the menu
bar and configure each setting.
Operation Settings
Keys Touch Sound
This setting is used to adjust (or turn off) the volume of the
beep that sounds when you select a key.
Key Touch Sound at Initial Point
You can have three beeps sound at initial values when
setting the ratio in copy mode or when adjusting the
exposure in any mode.
Screen in which setting is effective
Ratio setting screen in base screen of
copy mode
Exposure adjustment screen in base
screen of copy mode
Exposure adjustment screen in base screen of
fax, Internet fax, and network scanner modes

Auto Clear Setting

The time until Auto Clear activates can be set to any
number of minutes from 10 to 240.
If the machine is not used for the duration of time set
here, the auto clear function will clear any settings that
have been selected and return the screen to the base
screen of copy mode or the job status screen.
Cancel Auto Clear Timer
This is used to disable the auto clear function.

Message Time Setting

The duration of time that messages appear in the display
(the time until a message is automatically cleared) can
be set to any number of seconds from 1 to 12.
MFP Display Language Setting
The language that appears in the display can be changed.
When user authentication is enabled and a display
language is specified in the favorite operation group,
that setting is given priority.

Disabling of Job Priority Operation

This disables the job priority function and hides the
[Priority] key in the job status screen.

Disabling of Bypass Printing

This is used to disable bypass printing (printing other
jobs ahead of a job that has been stopped* because the
paper required for the job is not in any of the trays).
* This does not include cases where the paper ran out
Initial
during the job.
value
Ratio 100%

Key Operation Setting

This setting determines how long a key in the display
Exposure
must be selected until the key input is registered. The
level:
time can be set from 0 to 2 seconds in increments of 0.5
3 (medium)
seconds.
By lengthening the time setting, key input can be
prevented when a key is selected accidentally. Keep in
mind, however, that when a longer setting is selected
more care is required when selecting keys to ensure that
key input is registered.
Disable Auto Key Repeat
This is used to disable key repeat.
Key repeat causes a setting to change continuously
while a key is selected, not only each time the key is
selected.

Disabling of Clock Adjustment

This setting is used to prohibit changing of the date and
time.
Business Card Scan Option
When this setting is enabled, "Business Card Scan" can
be used in the special modes for copying and scanning.
MFP Display Pattern Setting
One of the six color patterns can be selected for the
color pattern in the display.
A sample of the selected pattern can be viewed.
6-69
SYSTEM SETTINGS
WEB PAGE (ADMINISTRATOR)
Contents