CHANGING THE PRINT SETTINGS FOR THE
TRANSACTION REPORT
(Transaction Report)
A transaction report is automatically printed out to alert you when an Internet fax transmission fails or when a broadcast
transmission is performed. The transaction report contains a description of the transmission (date, start time, name of
other party, time required, number of pages, result, etc.).
☞
INFORMATION APPEARING IN THE RESULT COLUMN
This function cannot be used in scan mode, USB memory mode, or data entry mode.
Transaction reports are printed based on conditions set in the system settings; however, you can temporarily select
different conditions for a transmission. To change the transaction report print conditions at the time of transmission,
follow the steps below.
Keys in the display can be selected with the arrow keys and the [OK] key.
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
1
When the original is a different size than the size setting, set the original size.
☞
SPECIFYING THE ORIGINAL SCAN SIZE AND SEND SIZE
Specify the destination.
2
☞
ENTERING DESTINATIONS
Select the special modes.
(1) Select the [Mode Switch] key.
(2) Select the [Internet Fax] key.
3
(3) Select the [Special Modes] key.
(4) Select the [Transaction Report] key.
☞
SPECIAL MODES
(page 5-22)
(page 5-77)
(page 5-108)
(page 5-61)
5-98
SCANNER/INTERNET FAX
Contents