Sharp DX-C310 Operation Manual page 302

(10) [Direct TX] key
Select this key to send a fax by direct transmission.
☞
To fax a large number of sheet originals, use the
automatic document feeder.
☞
If you wish to send a fax ahead of other previously
reserved fax transmissions, use direct transmission
mode. (page 4-29)
(11) [Data Hold] key
When "Hold Setting for Received Data Print" or
"Received Data Image Check Setting" (Web page only) is
enabled in the system settings (administrator), this will
appear when a fax is received.
: Only "Hold Setting for Received Data Print" is enabled
: Only "Received Data Image Check Setting" is enabled
: Both settings are enabled
☞
PRINTING A PASSWORD-PROTECTED FAX (Hold
Setting For Received Data Print)
Customizing displayed keys
Keys for special modes and other settings can be stored as shortcut keys. You can assign frequently used functions to
these keys to access the functions with a single touch. To change the function that is assigned to a key, use "Customize
Key Setting" in the Web pages. The following keys appear by factory default:
• [Program] key, [Global Address] key
Select to use the Program function or a Global Address book.
☞
STORING FAX OPERATIONS (Program)
☞
RETRIEVING A DESTINATION FROM A GLOBAL ADDRESS BOOK
• [Address Review] key
Select this to view a list of the destinations that have been selected in the address book and the numbers that have been
directly entered with the numeric keys. This is the same key as the [Address Review] key in the address book screen.
Example: When "Erase", "Job Build", and "Slow Scan Mode" are assigned to the customized keys.
These 3 keys can be changed
as desired.
System Settings (Administrator): Customize Key Setting (Web page only)
Registration is performed in [System Settings] - [Operation Settings] - "Customize Key Setting" in the Web page menu.
(page 4-28)
(page 4-61)
(page 4-71)
4-9
(12) [Sub Address] key
Select this key to enter a sub-address and passcode for
F-code transmission.
☞
F-CODE DIALING
(13) [Speaker] key / [Pause] key / [Space] key
Select this key to dial using the speaker.
When entering a fax number to be dialed, the key
changes to the [Pause] key. When entering a
sub-address, the key changes to the [Space] key.
☞
TRANSMISSION USING THE SPEAKER
4-39)
(14) [Resend] key / [Next Address] key
Select this key to redial a fax number. When entering a
fax number to be dialed, this key changes to the [Next
Address] key.
☞
USING THE RESEND FUNCTION
☞
CHECKING THE IMAGE BEFORE PRINTING
4-62)
(15) This shows the currently selected fax reception
mode and the amount of free memory remaining.
☞
RECEIVING FAXES
(page 4-24)
FACSIMILE
(page 4-101)
(page
(page 4-26)
(page
(page 4-58)
Contents