Sharp DX-C310 Operation Manual page 498

(1)
(2)
2
(1)
(2)
• System Settings (Administrator): Default Color Mode Settings (Web page only)
The default color mode can be changed.
• System Settings (Administrator): Disable Change of B/W Setting in Auto Mode (Web page only)
This prohibits selection of the black and white original scanning setting when [Auto] is selected for the color mode.
Select the color mode.
(1) Select the [Color Mode] key.
BACK OK
(2) Select the key of the mode to be used when
the [COLOR START] key is pressed.
You can select whether black & white scanning will take
place in Mono2 or grayscale when [Auto] is selected and
a black and white original is scanned. Note that if the file
format is set to JPEG, scanning will take place in
grayscale.
BACK OK
Select the B/W mode.
(1) Select the [B/W Mode] key.
(2) Select the key of the mode to be used when
BACK OK
the [BLACK & WHITE START] key is
pressed.
BACK OK
5-76
SCANNER/INTERNET FAX
Contents