Sharp DX-C310 Operation Manual page 157

5
(1)
6
(1)
Press the [COLOR START] key or the [BLACK & WHITE START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have
selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then select the
[Read-End] key. (For the second original and following originals, use the same [START] key as you did for the first original.)
7
• If you selected printing in color, press the [COLOR START] key. Even if a color is selected, pressing the [BLACK &
WHITE START] key will print the stamp items in black and white.
• If a color print setting is selected, the copy will be counted as a full color copy even if it is black & white.
To cancel scanning and copying...
Press the [STOP] key (
To cancel Stamp...
Select the [Cancel] key in the screen of step 3.
When you have finished selecting stamp
BACK OK
settings, select the [Enter] key.
Select settings for the original.
(2)
(1) Select the [Original Orientation] key and
BACK OK
(2) Press the [BACK] key twice.
BACK OK
).
2-57
specify the orientation of the placed
original.
If 2-sided originals have been placed, select the [2-Sided
Original Type] key and specify the binding position
(booklet binding or tablet binding) of the originals.
You will return to the base screen of copy mode.
To edit a stamp position or delete a stamp item, select the
[Layout] key.
☞
CHECKING THE STAMP LAYOUT (Layout)
2-69)
COPIER
(page
Contents