Sharp DX-C310 Operation Manual page 365

(1) [Add] key
Use this key to add a new program.
Select the [Add] key in the above screen to open a registration screen. Up to 48 programs can be stored.
For more information, see "Settings" (page 4-72).
• A timer setting cannot be included in a program.
• At least one one-touch key must be specified in a program or the program cannot be stored.
• Programs can also be stored using the Web pages. Click [Job Programs] and then [Image Send] in the Web page menu.
• The settings stored in a program will be retained even after the program is used for transmission. The same settings can
be used repeatedly for transmission.
• The following settings can be stored in programs.
• Destinations:
• Image settings:
• Special modes:
• F-code communication: A destination that includes an F-code can be stored to perform an F-code operation.
• Up to 500 destinations can be stored in each program.
Editing and deleting job programs
A program can be selected from the list in the above screen to open an edit screen for the program.
To delete the program, select the checkbox
For more information, see the following table.
Settings
Item
Program Number
Program Name
Condition Settings
Mode Switch
Mode Settings
Address Setting
One-touch keys, group keys, search numbers
Original scan size, original orientation, duplex scanning, exposure, resolution
Polling reception, Erase, Job Build, Slow Scan Mode, Business Card Scan
next to the program name and then select [Delete].
Set the number to be assigned to the program. The lowest available number is
automatically entered. To change the number, enter a number from 01 to 48. A
number that has already been stored cannot be used.
Enter a maximum of 36 characters for the program name.
This shows setting screens for each mode.
Select the mode that you wish to use (Internet Fax, scan, copy, etc.). The display will
change to the base screen of the selected mode.
Frequently used settings can be stored in the same way as when they are selected
for a mode.
This shows the setting screen for addresses.
Select the address(es) to be used in the program from the address book. Up to 500
destinations can be stored in one program.
4-72
(2) List display
This displays a list of the currently stored programs. A
program can be selected to open an edit/delete screen
for the program.
Description
FACSIMILE
Contents