Sharp DX-C310 Operation Manual page 508

(A)
(1)
(B)
(2)
4
• The send size will be selected automatically based on the entered original size.
• After selecting card scan, you can change the scan size and the send size from the [Scan Size] key and [Send Size]
key in the base screen. In this case, the screen of this step will appear in the scan size setting screen. For the
procedure for setting the send size, see
Press the [COLOR START] key or the [BLACK & WHITE START] key to scan the
front side of the card.
5
If the destination is an Internet fax destination, press the [BLACK & WHITE START] key.
To cancel scanning...
Press the [STOP] key (
Turn the card over and press the [COLOR START] key or the [BLACK & WHITE
START] key to scan the reverse side of the card.
Press the same [START] key that was used to scan the front side.
6
Before scanning the back of the card, you can select the [Configure] key in the display to change the exposure.
To cancel scanning...
Press the [STOP] key (
BACK OK
Y
X
"Specifying the send size of the
) to cancel the operation.
) to cancel the operation.
5-86
SCANNER/INTERNET FAX
Specify the original size.
(1) Enter the original size.
• Select the [X] key and enter the horizontal dimension
(X) of the original with the
• Select the [Y] key and enter the vertical dimension (Y)
of the original with the
(A) To return the original size to the default size, select
the [Size Reset] key.
(B) To have the image automatically enlarged or reduced
to the send size, select the [Fit to Send Size]
checkbox . The checkbox does not need to be
selected if you wish to scan at the entered original
size.
(2) Select the [Basic Menu] key.
image" (page 5-65).
keys.
keys.
Contents