Transmission Using The Speaker - Sharp DX-C310 Operation Manual

TRANSMISSION USING THE SPEAKER

When the speaker is used to dial, the fax is sent after the number is dialed and the connection is established. If a person
answers, you will be able to hear his or her voice, but you will not be able to speak.
Keys in the display can be selected with the arrow keys and the [OK] key.
1
(2)
(3)
2
AAA AAA
BBB BBB
CCC CCC
DDD DDD
EEE EEE FFF FFF
GGG GGG HHH HHH
III III JJJ JJJ
• In addition to specification by one-touch key, a destination can also be specified using a search number. You can
also directly enter a fax number with the numeric keys or look up a destination in a global address book. For more
information, see
• After selecting the [Speaker] key and pressing the [OK] key, you can select the [Speaker Volume] key and press the
[OK] key to adjust the volume of the speaker. The speaker volume changes each time the [OK] key is pressed with
the [Speaker Volume] key selected. Adjust the volume to the desired level.
Wait until the connection is made and then press the [BLACK & WHITE START] key.
Transmission begins.
3
To cancel transmission...
Select the [Speaker] key and press the [OK] key before the [BLACK & WHITE START] key is pressed. The line will be
disconnected and transmission will stop.
(1)
BACK OK
BACK OK
"ENTERING DESTINATIONS" (page 4-19).
Place the original.
Place the original face up in the document feeder tray, or face
down on the document glass.
When the document glass is used, only one page can be
transmitted.
When the original is a different size than the size setting, set
the original size.
☞
SPECIFYING THE SCAN SIZE AND SEND SIZE
)
4-50
Enter the destination fax number.
(1) Select the [Speaker] key.
You will hear the dial tone through the machine's speaker.
(2) Select the [Address] key in the base screen.
(3) Select the one-touch key of the desired
destination.
A group key cannot be used.
4-39
FACSIMILE
(page
Contents