Table of Contents
Advertisement
(1)
(2)
3
• When scanning to USB memory, there is no need to specify the destination.
• If a destination of another mode has been previously specified, a message will appear when you change to USB
memory mode indicating that the destination setting will be cleared. Select [OK], press the [OK] key, and go to the
next step.
• The current settings of [Scan Size], [Send Size], [Exposure], [Resolution], [File Format], and [Color Mode] are
indicated in each key. The settings can be changed in the setting screens.
☞
AUTOMATICALLY SCANNING BOTH SIDES OF AN ORIGINAL (2-Sided Original)
THE ORIGINAL SCAN SIZE AND SEND SIZE
IMAGE TYPE
(page 5-70),
BACK
OK
BACK
OK
(page 5-67),
CHANGING THE RESOLUTION
CHANGING THE COLOR MODE
5-40
SCANNER/INTERNET FAX
Switch to USB memory mode.
(1) Select the [Mode Switch] key.
(2) Select the [USB Memory Scan] key.
(page 5-61),
CHANGING THE EXPOSURE AND ORIGINAL
(page 5-69),
CHANGING THE FILE FORMAT
(page 5-75),
SPECIAL MODES
(page 5-59),
SPECIFYING
(page 5-77)
Contents
Advertisement
Chapters
Table of Contents
