Special Modes - Sharp DX-C310 Operation Manual

SPECIAL MODES

This section explains special modes that can be used in scan send mode.
SPECIAL MODES
When the [Special Modes] key is selected in the base screen, the special modes menu screen appears. The special
modes menu consists of three screens. Select the
Menu] key is selected in the special modes screen, the selected settings are entered and the base screen reappears.
☞
Internet fax mode (page 5-78)
Scan mode, USB memory mode, Data entry mode
(1) [Function Review] key*
Select this key to check the special mode settings.
2, 3
(2) [Program] key*
☞
STORING SCAN OPERATIONS (Programs)
5-79)
2
(3) [Timer] key*
☞
SENDING AN IMAGE AT A SPECIFIED TIME
(Timer Transmission)
(4) [Card Shot] key
☞
SCANNING BOTH SIDES OF A CARD ONTO A
SINGLE PAGE (Card Shot)
(5) [Bus. Card Scan] checkbox*
☞
SCANNING BUSINESS CARDS (Business Card
Scan) (page 5-88)
This cannot be selected when a special mode has not been enabled.
*1
Does not appear in USB memory mode.
*2
Does not appear in data entry mode.
*3
The optional business card feeder must be attached and "Business Card Scan Option" must be enabled in the
*4
system settings (administrator).
(1)
(2)
(3)
1
(page
(page 5-83)
(page 5-85)
4
key to switch between the three screens. When the [Basic
(4)
(5)
(6)
(6) [Slow Scan Mode] checkbox
☞
SCANNING THIN ORIGINALS (Slow Scan Mode)
(page 5-89)
(7) [Erase] key
☞
ERASING PERIPHERAL SHADOWS ON THE
IMAGE (Erase)
(8) [Job Build] checkbox
☞
SCANNING MANY ORIGINALS AT ONCE (Job
Build) (page 5-94)
(9) [Suppress Background] key
☞
WHITENING FAINT COLORS IN THE IMAGE
(Suppress Background)
5-77
SCANNER/INTERNET FAX
(page 5-91)
(page 5-96)
Contents
(7)
(8)
(9)