Sharp DX-C310 Operation Manual page 194

(1)
(2), (3)
3
Examples of color balance adjustment
To return the color balance values to the default settings...
Select the
values.
The default color balance values are set in "Initial Color Balance Setting" in the system settings (administrator).
Press the [COLOR START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you
have selected sort mode, change originals and press the [COLOR START] key. Repeat until all pages have been scanned
4
and then select the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key (
BACK OK
(4)
BACK OK
(5)
BACK OK
The settings of all gradations
are moved toward +
The settings of all gradations
are moved toward -
key and press the [OK] key. The values of all eight gradations will return to the default color balance
).
Adjust the color balance.
(1) Select the color to be adjusted.
Select [Y] (yellow), [M] (magenta), [C] (cyan), or [Bk] (black).
An icon in front of a number indicates that the adjustment
value has been changed.
(2) Select the gradation to be adjusted.
Select the gradation with the
Select the
move the highlighting to one of gradations "1" to "8" or
"All".
To adjust all eight gradations at once, move the
highlighting to "All".
(3) Adjust the density.
To darken the density of the selected gradation, select the
[+] key and press the [OK] key. To lighten the density,
select the [-] key and press the [OK] key. Each time you
press the [OK] key, the indicator frame moves up or down
one level.
(4) Select the [Color Balance] key.
To adjust other colors, repeat steps (1) to (4).
(5) Select the [Special Modes] key.
You will return to the special modes screen. Press the
[BACK] key to return to the base screen of copy mode.
2-94
COPIER
keys.
keys and press the [OK] key to
Contents