Sharp DX-C310 Operation Manual page 464

Hide thumbs Also See for DX-C310:
Table of Contents

Advertisement

Press the [COLOR START] key or the [BLACK & WHITE START] key.
Scanning begins.
• If the original is placed on the document glass, the [Read-End] key appears in the display. If the original is only one page,
go to step 7. To scan more pages, go to the next step.
• If the original was inserted in the document feeder tray, a beep will sound when scanning is completed and transmission
will begin. Go to step 8.
Do not disconnect the USB memory until "Sending data has been completed." appears in the display.
• To scan in full color, press the [COLOR START] key. To scan in black and white, press the [BLACK & WHITE
START] key. If the color mode of the [COLOR START] key is set to [Auto], the color of the original will be detected
5
automatically and scanning in full color, grayscale or Mono2 will take place.
• If the file type is [Encrypt PDF], a password entry screen will appear when the [START] key is pressed.
Select the [Entry] key and press the [OK] key to open the keyboard screen. Enter a password (maximum of 32
characters), and press the [OK] key. The recipient must use the password entered here to open the encrypted PDF file.
To cancel encrypted PDF, select the [Cancel] key and press the [OK] key. The format settings screen will appear to
let you change the file type. Select a new file type and press the [START] key to begin transmission.
If the original was placed on the document glass, replace it with the next original
6
and press the [COLOR START] key or the [BLACK & WHITE START] key.
Repeat until all originals have been scanned.
7
• If no action is taken for one minute after the confirmation screen appears, scanning automatically ends and the
transmission is reserved.
• To change the exposure, resolution, scan size, or send size for each original page scanned, select the [Configure]
key and press the [OK] key. However, when "Card Shot" is selected in the special modes, only the exposure can be
changed when scanning an even-numbered original page.
Select the [Read-End] key.
BACK
OK
A beep will sound to indicate that the operation is completed.
Open the automatic document feeder and remove the original.
5-42
SCANNER/INTERNET FAX
BACK
OK
Contents

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx-c310fxDx-c400Dx-c400fx

Table of Contents